Joystick Mounting Kit - No Visible Hardware

Starting at: $4.95

NOTE: Only one stick's worth of hardware is shown. Amount will be multiplied by the number of sticks in the option field.

-----

There are a couple of schools of thought on how to mount joysticks. One is the "don't mind the carriage bolt heads" crowd, and this kit is for the rest of us :).

Can be used in Plywood, MDF and other wood panels of at least 10mm (.400") in thickness. Kit comes with 4 inserts and mated screws per joystick and one installation tool per hardware kit.

Not Included, but required:

Drill Bits - 1/8" (pilot) and 5/16"
Drill (Hand or Press)
Marker or tape to gauge drill depth
Philips Head Screwdriver
Joysticks

Installation is simple. Mark your holes, using the joystick base as a template. Then drill a pilot hole to keep the large bit from wandering. Control the depth by marking the desired depth on the drill bit with a marker, or by creating a "stop" by wrapping the bit tightly with tape at the desired distance from the end of the bit. Care should be taken to drill the holes as straight and true as possible. Align the insert with the hole and screw it straight into the hole. Do not overtighten! When all inserts are installed, just attach the joystick base to the panel using the supplied screws.
 


Add to Cart:

  • Model: JYHRDWR1
  • Shipping Weight: 0.2lbs
  • 7 Units in Stock
  • Manufactured by: IDVT Inc.

Please Choose:

Joystick Quantity






This product was added to our catalog on Tuesday 10 June, 2008.

Your IP Address is: 3.235.227.36
Copyright © 2024 GroovyGameGear.com.
/*